Description
What it is
The SpeedShaft® Extension Cable adds reach to your SpeedCut® machine so you can push farther down the line without stopping. It's a genuine 3/8"(10mm) SpeedShaft® cable — the same anti-flip cable your machine runs — finished with a sturdy spring-loaded SpeedConnector on each end for fast chain and accessory changes. Add a section when the job runs long, then pull it off when it doesn't. Designed and built in the USA.
Why the genuine SpeedShaft®
Spring-loaded SpeedConnector
The sturdy spring-loaded connector snaps cables and accessories together in seconds — no fuss. Watch it lock in.
True SpeedShaft® build
The same 3/8"(10mm) anti-flip SpeedShaft® cable your machine runs — engineered to resist the flipping and kinking of ordinary flex shafts.
Dial in the right speed
Run it at normal descaler speed around 1,500 RPM, or step up to SpeedCut speed at 2,500 RPM+ for the tough stuff — the SpeedShaft® holds up either way.
Add reach in seconds
Connect a section when the line runs long, take it off when it doesn't — no second machine needed. SpeedShaft® extensions stack, so you can add more than one and combine sections to hit the total reach the job calls for.
Machine-matched
Built for the SpeedCut® Pro and Mini+ and any 3/8"(10mm) SpeedShaft® cable system — a clean, reliable fit every time.
Run it with a drill
Pair a section with a drill chuck adapter for 3/8"(10mm) SpeedShaft® cables and you can run it straight off a 1/2" drill chuck — quick descaling or root removal without the full machine.
Made in the USA
Designed and manufactured in the USA to the same standard as every SpeedCut® machine.
The SpeedShaft® Difference
Ask anyone who runs high-speed descaling equipment and they'll tell you the cable is what they worry about — it's the part that takes the punishment and, on most machines, the part that gives out first. That's exactly the problem we set out to solve. The SpeedShaft® is a custom, purpose-built high-speed descaling cable, engineered from the ground up to take the real-world abuse our customers put it through — job after job, year after year.
Fast, reliable tool changes
Swap chain knockers, brushes, and tools in seconds with the spring-loaded SpeedConnector. Preset your chain sizes on separate leaders and switch between them on the fly — fast, repeatable, and reliable, pass after pass.
Set screws don't wear out your cable
On a traditional flexible shaft, the set screw bites into the cable and wears a weak spot that eventually fails right where it's clamped. Not so with the SpeedShaft®. Run tools directly and the cable holds up — the set screws are a normal wear item you swap over time, but they don't chew up your SpeedShaft®. And because the leaders are made from the same cable as the base length, they take that same abuse without wearing down.
Anti-flip SpeedShaft® cable
The SpeedShaft® is a custom, purpose-built high-speed descaling cable. Its anti-flip design resists the torque-induced flipping and kinking that plague ordinary flex shafts, for cleaner, more controlled cutting.
More range, no give in strength
The SpeedShaft® works across a wide pipe range — 2" all the way to 8" on the Pro, and 2" to 6" on the Mini+, Mini+ Wheels, or off a drill with extensions — while staying strong the whole way. One versatile cable instead of swapping to a heavier setup for bigger lines.
Serviceable — in the field or by us
When a cable takes a beating, you're not stuck. Most SpeedShaft® repairs can be done right in the field to keep you working — and when you'd rather leave it to us, send it in and we'll take care of it. Either way, you're back on the job fast.
Built in the USA, built to last
Designed and built in the USA to hold up to real work. No overseas shortcuts — engineered and made here to earn its place in your rig for the long haul.
What it works with
- SpeedCut® Pro
- SpeedCut® Mini+
- Any 3/8"(10mm) SpeedShaft® cable system
- SpeedConnector chain knockers & accessories
- Drill chuck adapter for 3/8"(10mm) SpeedShaft® cables
- Stacks with other SpeedShaft® extensions
See it in action
Specifications
| Length | 50 ft |
| Cable | 3/8"(10mm) Anti-Flip SpeedShaft® |
| Connectors | Male & female spring-loaded SpeedConnector |
| Compatibility | SpeedCut® Pro, Mini+, Mini+ Wheels, and any machine running a SpeedConnector |
| Weight | 18 lb |
| Origin | Designed & built in the USA |
Documents & Support
Everything you need to run it right. Because we're here to help you solve the problem, not just sell you a cable.
Questions? Call 714-453-9760 or email sales@epls-usa.com.
Frequently asked questions
Which machines does it fit?
The SpeedCut® Pro and Mini+, and any 3/8"(10mm) SpeedShaft® cable system. It connects with the spring-loaded SpeedConnector.
Can I combine sections for more reach?
Yes. SpeedShaft® extensions stack, so you can run more than one — for example a second 50 ft section, or add a 25 ft — to hit the total reach a job needs.
Will it fit the SpeedCut® Mini?
The base SpeedCut® Mini uses a 5/16"(8mm) flex cable, so it doesn't run this 3/8"(10mm) SpeedShaft® extension. This extension is for the Pro and Mini+.
Can I use it with a drill?
Yes. With a drill chuck adapter for 3/8"(10mm) SpeedShaft® cables, you can run a section straight off a 1/2" drill chuck for quick descaling or root removal — no full machine required.
Why choose the genuine SpeedShaft® cable?
It's the same anti-flip cable your machine is built around, with the spring-loaded SpeedConnector for fast changes. That means a reliable fit, consistent performance, and the anti-flip behavior you won't get from a generic cable.
What's the warranty?
1-year manufacturer's warranty.
Do you offer financing?
Yes — financing is available.
Do you ship, and what are lead times?
Yes. As long as we have the parts in stock, we normally ship the same day or the following day. Larger items that require freight shipping can take a little longer. Lead times are subject to change — give us a call for a current estimate.
